夜雨聆风
通达信全能操盘主图源码泄露:集“基本面透视+精准抄底+高位逃顶”于一身的利器
很多兄弟喜欢做“抄底”，但往往抄在半山腰，因为分不清是“下跌中继”还是“真正反转”。老股民常说：“缺口对缺口，财富在招手”。这里说的就是经典的岛形反转（Island Reversal）。
分享好指标，点赞+在看=动力
指 标 说 明
很多兄弟在后台跟智哥吐槽：“炒股太累了！又要看K线找买点，又要按F10查业绩，手忙脚乱还是买到了‘暴雷股’，或者卖飞了‘大牛股’。”
基本面“照妖镜” (左上角面板) 源码内置了复杂的财务算法（Z值模型），自动计算市盈率、毛利率、现金负债比等数据。 核心功能：它会根据计算结果给出**“重警”、“轻警”、“无警”**的提示。如果显示“重警”，说明这公司财务风险极大，哪怕图形再好也别碰！ 均线趋势系统 (骨架) 利用MA5、MA10、MA30、MA60构筑多空防线。 攻抄金叉：短线进攻信号。 生决金叉：中线趋势确立信号。 主力行为信号 (杀手锏) 买入信号：通过成交量、价格波动率和均线乖离，计算出**“黑马”、“大牛”、“绝佳买点”**等文字信号。这是主力资金异动、突破关键压力的表现。 卖出信号：当股价乖离率过大或动能衰竭时，自动弹出**“逃”、“出货”、“逃命”**信号，防止你坐过山车。
打开K线图，先看左上角数据面板。 如果**“财务预警” 显示为 “重警”，或者 “Z值”**低于1.2，直接Pass！这种票随时可能ST或暴雷，看都不要看。
场景 ：股价在MA20（生命线）上方运行，或者刚刚突破MA20。信号 ：K线下方出现**“黑马”或 “大牛”**字样。操作 ：这通常是主力洗盘结束、开启主升浪的标志。特别是配合**“攻抄金叉”**红色字样同时出现时，胜率极高，果断跟进。
场景 ：股价经过一轮大涨，远离均线。信号 ：K线上方出现绿色的**“逃”字，或者紫色的 “出货”**字样。操作 ：别犹豫，这是指标检测到筹码松动，主力在边拉边撤。看见这个字，至少减仓一半，保住利润。
本指标为全自动主图，参数已在源码内部固化（如MA均线周期），无需手动调整，导入即可使用。
“黑马”也要看大势 ：如果大盘在大跌，或者个股处于MA60（60日线）下方的长期空头排列，即使出现“黑马”信号，也只能当超跌反弹做，快进快出，不要恋战。 信号共振才最稳 ：单个信号可能存在骗线。最佳的买点是： 股价站上20日线 + 出现“大牛/黑马”信号 + 成交量明显放大 。三者共振，才是确定性机会。止损位设置 ：买入后，以 20日均线 作为生命线。如果收盘价跌破20日线且三天收不回来，无条件止损。
Q1: 导入公式提示“行数过多”或“错误”？ A: 这个指标源码较长，包含了基本面函数。请确保复制完整，并且是在通达信电脑版【主图】公式里新建。如果是手机版，部分财务函数可能无法显示，但不影响买卖信号。
Q2: 左上角的数据不显示？ A: 需要下载专业财务数据。点击通达信菜单栏【选项】-【盘后数据下载】- 勾选【专业财务数据】下载即可。
Q3: 信号会消失（未来函数）吗？ A: 买卖信号主要基于MA、EMA、HHV等统计函数，不含未来函数，信号一旦收盘确认不漂移。左上角的财务数据是随季度更新的静态数据。
研 习 案 例
副图指标源码
所属板块:=STRCAT(‘【所属板块】’,STRCAT(STRCAT(STRCAT(‘ [行业]—’,HYBLOCK),STRCAT(‘ [地域]—’,DYBLOCK)),STRCAT(‘ [概念]—’,GNBLOCK)));
总股本:=STRCAT(STRCAT(‘ 总股本:’,CON2STR(TOTALCAPITAL/1000000,2)),’亿’);
流通盘:=STRCAT(STRCAT(‘ 流通盘:’,CON2STR(CAPITAL/1000000,2)),’亿’);
全流通:=STRCAT(STRCAT(‘ 流通比:’,CON2STR(CAPITAL/TOTALCAPITAL*100,2)),’％’);
市值:=STRCAT(STRCAT(‘ 流通市值:’,CON2STR((CAPITAL/1000000)*C,2)),’亿’);
上市日期:=STRCAT(‘ 上市日期: ‘,CON2STR(HHV((BARSCOUNT(C)=0)*(DATE+19000000),0),0));
股本市值:=STRCAT(‘【股本市值】’,STRCAT(STRCAT(STRCAT(STRCAT(总股本,流通盘),全流通),市值),上市日期));
市盈率:=STRCAT(‘ 市盈率:’,CON2STR(C/FINANCE(33),2));
市销率:=STRCAT(‘ 市销率:’,CON2STR(C/(FINANCE(20)/FINANCE(1)),2));
市净率:=STRCAT(‘ 市净率:’,CON2STR(C/FINANCE(34),2));
净资收益率:=STRCAT(‘ 净资收益率:’,CON2STR(FINANCE(33)/FINANCE(34)*100,2));
毛利率:=STRCAT(‘ 毛利率:’,CON2STR((FINANCE(20)-FINANCE(21))/FINANCE(20)*100,2));
净利润率:=STRCAT(‘ 净利率:’,CON2STR(FINANCE(30)/FINANCE(20)*100,2));
主营利润率:=STRCAT(‘ 主营利润率:’,CON2STR(FINANCE(23)/FINANCE(20)*100,2));
当前业绩:=STRCAT(‘【当前业绩】’,STRCAT(STRCAT(STRCAT(STRCAT(STRCAT(STRCAT(市盈率,市销率),市净率),净资收益率),毛利率),净利润率),主营利润率));
DRAWTEXT_FIX(ISLASTBAR,0.005,0.02,0,所属板块),COLORMAGENTA;
DRAWTEXT_FIX(ISLASTBAR,0.005,0.07,0,股本市值),COLORMAGENTA;
DRAWTEXT_FIX(ISLASTBAR,0.005,0.12,0,当前业绩),COLORMAGENTA;
DRAWTEXT_FIX(1,0.005,0.17,0,’莸利比例：’),COLORYELLOW;
DRAWNUMBER_FIX(1,0.06,0.17,0,CONST(WINNER(C )*100)),COLORYELLOW;
DRAWNUMBER_FIX(1,0.15,0.17,0,CONST(DYNAINFO(37)*100)),COLORYELLOW;
DRAWTEXT_FIX (1,0.12,0.17,0,’换手:’),COLORYELLOW;
DRAWNUMBER_FIX(1,0.25,0.17,0,CONST(DYNAINFO(17))),COLORYELLOW;
DRAWTEXT_FIX (1,0.22,0.17,0,’量比:’),COLORYELLOW;
DRAWTEXT_FIX (1,0.30,0.17,0,’涨幅:’),COLORYELLOW;
DRAWNUMBER_FIX(1,0.33,0.17,0,CONST(DYNAINFO(14)*100)),COLORYELLOW;
DRAWNUMBER_FIX(1,0.33,0.17,0,IF(CONST(DYNAINFO(14)*100)<0,CONST(DYNAINFO(14)*100),DRAWNULL)),COLORYELLOW;
ZZX1:=(FINANCE(11)-FINANCE(15))/FINANCE(10)*1.2;
ZZX2:=(FINANCE(31)+FINANCE(17))/FINANCE(10)*1.4;
ZZX3:=FINANCE(23)/FINANCE(10)*3.3;
ZZX4:=FINANCE(19)/FINANCE(15)*0.6;
ZZX5:=FINANCE(20)/FINANCE(15)*0.999;
Z值:=ZZX1+ZZX2+ZZX3+ZZX4+ZZX5;
预警:=IF(Z值<1.2,’重警’,IF(Z值>=1.2 AND Z值<2.6,’轻警’,’无警’));
财务预警:=STRCAT(‘财务预警: ‘,STRCAT(预警,STRCAT(‘-Z值: ‘,CON2STR(Z值,3))));
优质资产率:=STRCAT(‘ 优质资产率: ‘,CON2STR((FINANCE(19)-FINANCE(22)-FINANCE(27))/FINANCE(19),2));
现金负债比:=STRCAT(‘ 现金负债比: ‘,CON2STR(FINANCE(25)/FINANCE(15),3));
财务系数:=STRCAT(‘风险系数: ‘,STRCAT(STRCAT(财务预警,优质资产率),现金负债比));
DRAWTEXT_FIX(ISLASTBAR,0.005,0.23,0,财务系数),COLORGREEN;
E5:MA(C,5)LINETHICK1;
E10:MA(C,10)LINETHICK1;
E30:MA(C,30)LINETHICK1;
E60:MA(C,60)LINETHICK1;
DRAWTEXT(CROSS(E5,E10),LOW*0.95,’攻抄金叉’),COLORRED;
DRAWTEXT(CROSS(E30,E60),LOW*0.95,’生决金叉’),COLORMAGENTA;
DRAWKLINE(H,O,L,C);
MA20:=MA(CLOSE,20);
MA120:=MA(CLOSE,120);
MA30:=MA(CLOSE,37);
MAP:=MA(CLOSE,8);
AA5:=MA(CLOSE,21);
AA10:=MA(CLOSE,8),COLORFF0000;
AA12:=MA(CLOSE,12),COLORFF0000;
BB10:=((ATAN((AA10 – REF(AA10,1))) * 3.1416) * 10);
BB12:=((ATAN((AA12 – REF(AA12,1))) * 3.1416) * 10);
MA13:=MA(CLOSE,13);
JZB01:=((((OPEN + LOW) + HIGH) + CLOSE) / 4);
LL30:=LLV(LOW,30),;
HH30:=LLV(HIGH,30);
ZHIGE1:=EMA(JZB01,5);
ZHIGE2:=HHV(ZHIGE1,60);
ZHIGE3:=HHV(LOW,20),COLORFAABEC;
ZHIGE4:=SMA(LOW,5,1);
ZHIGE5:=MA(CLOSE,3);
DRAWTEXT(FILTER(((((HIGH > ZHIGE2) AND (CLOSE < ZHIGE2)) AND ((CLOSE / OPEN) > (0 – 1.06))) AND (CLOSE < OPEN)),5),(HIGH + 0.02),’逃’),COLORFFFF00;
ZHIGE6:=(MA(HIGH,15) * 1.05);
ZHIGE7:=(MA(LOW,15) * 0.985);
ZHIGE8:=(MA(LOW,15) * 0.96);
ZHIGE9:=(((HIGH + LOW) + CLOSE) / 3);
B1:=HHV(ZHIGE9,(4 * 15));
B6:=LLV(ZHIGE9,(4 * 15));
B7:=(B1 – B6);
B8:=(MA(((ZHIGE9 – B6) / B7),2) * 80);
JZB1:=(((CLOSE – LLV(LOW,100)) / (HHV(HIGH,100) – LLV(LOW,100))) * 200);
ZHIGE10:=SMA(JZB1,3,1);
JZB2:=SMA(ZHIGE10,3,1);
JZB3:=((3 * ZHIGE10) – (2 * JZB2));
JZB4:=LLV(LOW,5);
JZB5:=HHV(HIGH,5);
JZB6:=(EMA((((CLOSE – JZB4) / (JZB5 – JZB4)) * 100),4) * 2);
JZB7:=EMA(((0.667 * REF(JZB6,1)) + (0.333 * JZB6)),2);
JZB8:=((3 * JZB6) – (2 * JZB7));
JZB9:=(POW(MA(CLOSE,5),2) + MA(CLOSE,5));
JZBA:=(POW(MA(LOW,5),2) + MA(LOW,5));
JZBB:=(POW(MA(HIGH,5),2) + MA(HIGH,5));
JZBC:=(((((JZB9 – LLV(JZBA,64)) / (HHV(JZBB,64) – LLV(JZBA,64))) * 150) + 65) – 10);
JZBD:=((SMA(JZBC,3,1) * 1.5) – 100);
JZBE:=SMA(JZBD,3,1);
JZBF:=((3 * JZBD) – (2 * JZBE));
JZB10:=(((HIGH + LOW) + (CLOSE * 2)) / 4);
JZB11:=EMA(JZB10,13);
JZB12:=STD(JZB10,13);
JZB13:=(((JZB10 – JZB11) * 100) / JZB12);
JZB14:=EMA(JZB13,5);
JZB15:=EMA(JZB14,13);
JZB16:=((EMA(JZB14,13) + 200) – 100);
JZB17:=EMA(JZB16,10);
JZB18:=((3 * JZB16) – (2 * JZB17));
JZB19:=(((ZHIGE10 + JZB6) + JZBD) + JZB16);
JZB1A:=(((JZB2 + JZB7) + JZBE) + JZB17);
JZB1B:=(((JZB3 + JZB8) + JZBF) + JZB18);
JZB1C:=(((HIGH + LOW) + CLOSE) / 3);
JZB1D:=((AMOUNT / VOL) / 100);
JZB1E:=((SUM(AMOUNT,5) / SUM(VOL,5)) / 100);
JZB1F:=((JZB1C – MA(JZB1C,34)) / (0.015 * AVEDEV(JZB1C,34)));
JZB21:=((((HIGH + LOW) + CLOSE) + JZB1C) / 4);
JZB22:=EMA(JZB21,24);
JZB23:=STD(JZB21,24);
JZB24:=(((JZB21 – JZB22) / JZB23) * 100);
JZB25:=((JZB1C – MA(JZB1C,24)) / (0.015 * AVEDEV(JZB1C,24)));
JZB26:=EMA(JZB24,5);
JZB27:=((JZB1D – MA(JZB1D,21)) / (0.015 * AVEDEV(JZB1D,21)));
JZB28:=((JZB1E – MA(JZB1E,90)) / (0.015 * AVEDEV(JZB1E,90)));
JZB29:=(((((((JZB28 + JZB27) + JZB26) + JZB25) + JZB1F) / 5) + 165) / 4);
JZB2A:=(((((JZB19 + JZB1A) + (JZB1B * 30)) / 32) / 5) – 15);
JZB2B:=(((JZB29 + JZB2A) / 2) / 1.1);
JZB2C:=JZB2B;
ZHIGE11:=MA(JZB2C,26);
MID:=(ZHIGE11 + (2 * STD(JZB2C,26)));
UPPER:=(ZHIGE11 – (2 * STD(JZB2C,26)));
LOWER:=IF((JZB2C > ZHIGE11),ZHIGE11,JZB2C);
XY:=MA(CLOSE,5);
M80:=MA(CLOSE,80);
ZHIGE12:=(LLV(HIGH,30) * 0.93);
MA80:=LLV(HIGH,30);
ZHIGE13:=SMA(CLOSE,2,1);
ZHIGE14:=(MA(LOW,10) * 0.96);
ZHIGE15:=(EMA(OPEN,107) * 0.897);
ZHIGE16:=MA(CLOSE,15);
GF:=MA(CLOSE,10);
MAN:=(SMA(HIGH,21,2) * 1.05);
ZHIGE17:=(HHV(ZHIGE1,60) * 0.92);
ZHIGE18:=(SMA(HIGH,21,2) * 1.035);
ZHIGE19:=(SMA(LOW,21,2) * 0.96);
ZHIGE20:=(((CLOSE – LLV(LOW,13)) / (HHV(HIGH,13) – LLV(LOW,13))) * 100);
RSV:=SMA(ZHIGE20,3,1);
K:=SMA(RSV,3,1);
D:=((3 * RSV) – (2 * K));
J:=(((CLOSE – MA(CLOSE,6)) / MA(CLOSE,6)) * 100);
JZB2P:=(((CLOSE – MA(CLOSE,12)) / MA(CLOSE,12)) * 100);
JZB3P:=(((CLOSE – MA(CLOSE,24)) / MA(CLOSE,24)) * 100);
JZB4P:=(((J + (2 * JZB2P)) + (3 * JZB3P)) / 6);
JZB5P:=MA(JZB4P,3);
JZB6P:=(((CLOSE – LLV(LOW,34)) / (HHV(HIGH,34) – LLV(LOW,34))) * 100);
RSV12:=SMA(JZB6P,3,1);
K12:=SMA(RSV12,3,1);
D12:=((3 * RSV12) – (2 * K12));
J12:=(((CLOSE – LLV(LOW,55)) / (HHV(HIGH,55) – LLV(LOW,55))) * 100);
RSV24:=SMA(J12,3,1);
K24:=SMA(RSV24,3,1);
D24:=((3 * RSV24) – (2 * K24));
J24:=IF(CROSS(D,D24),LOW,REF(LOW,BARSLAST(CROSS(D,D24))));
ZHIGE21:=IF(CROSS(D24,D),HIGH,REF(HIGH,BARSLAST(CROSS(D24,D))));
ZHIGE22:=IF((CLOSE >= MA(CLOSE,20)),80,50);
U2L:=IF((CLOSE >= MA(CLOSE,20)),50,20);
L2L:=IF(((D < ZHIGE22) AND (REF(D,1) >= ZHIGE22)),HHV(REF(HIGH,1),(BARSLAST(((D >= ZHIGE22) AND (REF(D,1) < ZHIGE22))) – 1)),REF(HHV(REF(HIGH,1),(BARSLAST(((D >= ZHIGE22) AND (REF(D,1) < ZHIGE22))) – 1)),BARSLAST(((D < ZHIGE22) AND REF(D,1)))));
RH1:=IF((HIGH > L2L),LOW,REF(LOW,BARSLAST((HIGH > L2L))));
RH4:=IF((HIGH > L2L),D,REF(D,BARSLAST((HIGH > L2L))));
RH42:=IF((((HIGH > RH1) AND (D < RH4)) AND (D < D24)),HIGH,REF(HIGH,BARSLAST((((HIGH > RH1) AND (D < RH4)) AND (D < D24)))));
RH5:=IF(((D > U2L) AND (REF(D,1) <= U2L)),LLV(REF(LOW,1),(BARSLAST(((D <= U2L) AND (REF(D,1) > U2L))) – 1)),REF(LLV(REF(LOW,1),(BARSLAST(((D <= U2L) AND (REF(D,1) > U2L))) – 1)),BARSLAST(((D > U2L) AND REF(D,1)))));
RL1:=IF((LOW < RH5),HIGH,REF(HIGH,BARSLAST((LOW < RH5))));
RL4:=IF((LOW < RH5),D,REF(D,BARSLAST((LOW < RH5))));
RL42:=IF((((LOW < RL1) AND (D > RL4)) AND (D > D24)),LOW,REF(LOW,BARSLAST((((LOW < RL1) AND (D > RL4)) AND (D > D24)))));
ZHIGE23:=LLV(HIGH,30);
DRAWTEXT(FILTER(((((RL42 = J24) AND (CLOSE > OPEN)) AND (CLOSE > ZHIGE23)) AND (LOW <= J24)),20),(LOW – 0.12),’底成’),COLOR0EABFF;
RL5:=(SMA(HIGH,5,2) * 1.05);
上:=(SMA(LOW,5,2) * 0.96);
下:=SMA(LOW,2,1);
中:=(((((3 * CLOSE) + HIGH) + LOW) + OPEN) / 6);
X1:=EMA(中,10);
X2:=REF(X1,1);
X3:=((REF(HIGH,1) + REF(LOW,1)) / 2);
X4:=(MA(CLOSE,21) + (2 * STD(CLOSE,21)));
X5:=REF(CLOSE,1);
X6:=((SMA(MAX((CLOSE – X5),0),7,1) / SMA(ABS((CLOSE – X5)),7,1)) * 100);
X7:=CROSS(79,X6);
X8:=FILTER(X7,4);
X9:=MA(CLOSE,115);
JZB001:=EMA(CLOSE,8);
ZHIGE24:=EMA(JZB001,20);
JZB002:=CROSS(JZB001,ZHIGE24);
JZB003:=(JZB001 < MA(CLOSE,20));
JZB004:=(((HHV(HIGH,36) – CLOSE) / (HHV(HIGH,36) – LLV(LOW,36))) * 100);
JZB005:=SMA(JZB004,5,1);
JZB006:=SMA(JZB005,8,1);
JZB007:=(CROSS(JZB005,JZB006) AND (JZB006 < 5));
JZB008:=((CLOSE > (LLV(CLOSE,60) + (0.3 * LLV(CLOSE,60)))) AND JZB007);
JZB009:=IF((CLOSE > 1000),JZB007,JZB008);
JZB00F:=CROSS(X1,X2);
MA115:=JZB00F;
ZHIGE25:=(JZB002 AND JZB003);
ZHIGE26:=JZB009;
DRAWTEXT(X8,(HIGH * 1.03),’出货’),COLOR9000F5;
DRAWTEXT((ZHIGE26 > 0),(HIGH * 1.04),’逃命’),COLORFF0000;
ZHIGE27:=(SMA(HIGH,21,2) * 1.05);
ZHIGE28:=(SMA(LOW,21,2) * 0.94);
DRAWTEXT(FILTER(((((((((CLOSE / OPEN) > 1.03) AND ((ZHIGE16 – REF(ZHIGE16,1)) > 0)) AND ((CLOSE – REF(CLOSE,1)) > 0)) AND (HIGH < ZHIGE3)) AND (CLOSE < ZHIGE3)) AND ((ZHIGE18 – REF(ZHIGE18,1)) > 0)) AND (CLOSE < MAN)),3),LOW,’出击’),COLOR646E69;
DRAWTEXT((((((ZHIGE25 > 0) AND ((X1 – REF(X1,1)) > 0)) AND (HIGH < ZHIGE21)) AND (HIGH < X9)) AND ((X2 – REF(X2,1)) > 0)),LOW,’黑马’),COLOR00FF00;
DRAWTEXT((((CROSS(JZB2C,UPPER) AND (HIGH < ZHIGE3)) AND ((XY – REF(XY,1)) > 0)) AND (HIGH < ZHIGE2)),LOW,’买’),COLORFFFFFF;
DRAWTEXT(FILTER((((((MA115 AND (CLOSE < ZHIGE21)) AND ((ZHIGE8 – REF(ZHIGE8,1)) > 0)) AND ((X1 – REF(X1,1)) > 0)) AND (HIGH < ZHIGE17)) AND ((CLOSE / OPEN) > 1.03)),5),LOW,’●买’),COLOR93EE7D;
DRAWTEXT(((((LOW <= 上) AND (HIGH >= ZHIGE12)) AND (CLOSE >= ZHIGE23)) AND ((CLOSE / OPEN) > 1.03)),(LOW – 0.08),’抄底’),COLOR0000FF;
DRAWTEXT(FILTER((((((LOW <= ZHIGE19) AND ((MA20 – REF(MA20,1)) > 0)) AND (OPEN <= ZHIGE17)) AND (HIGH > ZHIGE17)) AND (CLOSE > ZHIGE19)),5),LOW,’涨10%’),COLORFFFFFF;
DRAWTEXT(FILTER((((((B8 <= 1) AND (LOW <= ZHIGE28)) AND (CLOSE > OPEN)) AND (LOW <= LL30)) AND (CLOSE >= ZHIGE23)),3),(LOW – 0.08),’短抄’),COLORA100FF;
DRAWTEXT(FILTER((((CROSS(ZHIGE14,ZHIGE15) AND (HIGH < M80)) AND (HIGH < ZHIGE3)) AND LLV(LOW,0)),10),LOW,’果断买’),COLOR668800;
DRAWTEXT(FILTER(((CROSS(ZHIGE5,ZHIGE8) AND (LOW <= ZHIGE8)) AND (CLOSE >= ZHIGE8)),4),(LOW – 0.06),’买’),COLOR00FF00;
DRAWTEXT(FILTER((((((((MA20 – REF(MA20,1)) > 0) AND (HIGH < ZHIGE2)) AND ((AA10 – REF(AA10,1)) > 0)) AND (HIGH < ZHIGE3)) AND (VOL >= REF(VOL,1))) AND CROSS(CLOSE,MA20)),57),LOW,’突破生命线’),COLOR0000FF;
DRAWTEXT(FILTER(((((LOW <= MA80) AND (CLOSE > MA80)) AND (CLOSE > OPEN)) AND (ZHIGE13 <= MA80)),8),LOW,’底’),COLORFFFF00;
DRAWTEXT(((CROSS(MA20,ZHIGE21) AND (LOW <= MA20)) AND ((MA20 – REF(MA20,1)) > 0.02)),(LOW – 0.03),’绝佳买点’),COLORAFA0AF;
DRAWTEXT((((((((CROSS(CLOSE,MA20) AND (HIGH < ZHIGE21)) AND (OPEN < MA20)) AND (HIGH < ZHIGE2)) AND ((MAN – REF(MAN,1)) > 0)) AND ((X1 – REF(X1,1)) > 0)) AND (D < 63)) AND ((MA20 – REF(MA20,1)) > 0)),(LOW – 0.05),’大牛’),COLOR73777F;
DRAWTEXT(CROSS(LL30,ZHIGE12),(LOW – 0.02),’短线买’);
指标源码点击左下角的小字“阅读原文”，进入一键复制代码
指 标 获 取
01
方式一
登录金指标官网（www.logic88.cn）——搜索下载需要的指标，上万精品指标任你挑。
02
方式二
复制下面的链接到浏览器打开下载：
www.logic88.cn/182921.html
03
方式三
点击左下角的小字“阅读原文”，进入到指标原文页面下载指标。
点击下方“阅读原文”进入复制指标代码
