通达信“首板跳空不破”源码分享, 安全指标!

书读百遍其意自现

核心逻辑

长期横盘后首板涨停、缩量回调后出现向上跳空缺口且未回补的，此时为进场点，破缺口则离场。

★★★源码如下★★★

{主图源码}：

SH:=CODELIKE('00') OR CODELIKE('60');

SZ:=CODELIKE('30') OR CODELIKE('68');

SS:=CODELIKE('4') OR CODELIKE('8');

X1:=IF(SH,0.1,IF(SZ,0.2,IF(SS,0.3,100)));

ZT:=C=H AND C>=ZTPRICE(REF(C,1),X1);

LBTS:=BARSLASTCOUNT(ZT);

ZB:=C<H AND H>=ZTPRICE(REF(C,1),X1);

SYX:=100*(H-MAX(C,O))/REF(C,1);

ST:=100*ABS(C-O)/REF(C,1);

XYX:=100*(MIN(C,O)-L)/REF(C,1);

JZF:=100*(O/REF(C,1)-1);

BL:=V>2*REF(V,1);

TZ1:=SS=0 AND ZT AND COUNT(ZT,20)=1 AND ST>8 AND COUNT(ZB,5)=0 AND HHV(JZF,10)<9 AND REF(BL=0 AND HHV(LBTS,20)<2 AND HHV(LBTS,60)<3,1) AND L<REF(HHV(H,3),1);

NN1:=BARSLAST(TZ1);

TZ2:=EVERY(L>REF((C+O)/2 AND ZT=0 AND ZB=0 AND XYX<5,NN1) AND C<1.02*REF(H,NN1-1) AND V<REF(V,NN1-1) AND ZB=0 AND L<REF(H,1) AND H>REF(L,1) AND ST<5 AND SYX<5 AND XYX<5,NN1-1);

XG:=REF(TZ2,1) AND BL AND C>O AND L>REF(H,1) AND ZT=0 AND ZB=0;

STICKLINE(ZT,H,L,0,0),COLORRED;

STICKLINE(ZT,C,O,3,0),COLORRED;

DRAWICON(XG,H*0.9,1);  

DRAWTEXT(XG,H*1.05,'信号'),COLORYELLOW;  

（选G源码}：

SH:=CODELIKE('00') OR CODELIKE('60');

SZ:=CODELIKE('30') OR CODELIKE('68');

SS:=CODELIKE('4') OR CODELIKE('8');

X1:=IF(SH,0.1,IF(SZ,0.2,IF(SS,0.3,100)));

ZT:=C=H AND C>=ZTPRICE(REF(C,1),X1);

LBTS:=BARSLASTCOUNT(ZT);

ZB:=C<H AND H>=ZTPRICE(REF(C,1),X1);

SYX:=100*(H-MAX(C,O))/REF(C,1);

ST:=100*ABS(C-O)/REF(C,1);

XYX:=100*(MIN(C,O)-L)/REF(C,1);

JZF:=100*(O/REF(C,1)-1);

BL:=V>2*REF(V,1);

TZ1:=SS=0 AND ZT AND COUNT(ZT,20)=1 AND ST>8 AND COUNT(ZB,5)=0 AND HHV(JZF,10)<9 AND REF(BL=0 AND HHV(LBTS,20)<2 AND HHV(LBTS,60)<3,1) AND L<REF(HHV(H,3),1);

NN1:=BARSLAST(TZ1);

TZ2:=EVERY(L>REF((C+O)/2 AND ZT=0 AND ZB=0 AND XYX<5,NN1) AND C<1.02*REF(H,NN1-1) AND V<REF(V,NN1-1) AND ZB=0 AND L<REF(H,1) AND H>REF(L,1) AND ST<5 AND SYX<5 AND XYX<5,NN1-1);

XG:REF(TZ2,1) AND BL AND C>O AND L>REF(H,1) AND ZT=0 AND ZB=0;

复制的时候如果出现错误，可以把代码先放到文档里，从文档里重新复制粘贴，指标都是我测试过的，没有问题的。

若实在鼓捣不成的，可问我要TN6文件直接安装，但前提看看自己是否在我往期文章里留有脚印，点赞转发爱心是否给力，否则不予理睬

也许指标也缺陷，但我们主要学习的是思路，一个好的思路才是我们成功的最大收获！

点文末右下角的“”和“” 可以有效避免复制出错。